Requirements and Installation

Read this page to start using Project Assist.


Requirements

Before using Project Assist, make sure you have the following:

  • Required: DGLux5.
  • Required if you are using Niagara: Niagara AX or Niagara 4. Recommended: version 3.7 or later.
  • Recommended if you are using a JACE controller: JACE-700 or above.
  • Sufficient space. Project Assist requires 35 MB including HVAC assets and styles. Without HVAC assets, it requires 3 MB. Without assets or styles, it requires 750 kB.

If you need to install DGLux5, see Install DGLux5 for Niagara AX or Install DGLux5 for Niagara 4.


Installation

Project Assist is a DGLux5 project template that you can download and import:

  1. Download the Project Assist DGLux5 project template from the DGLogik website.
  2. Ensure the device has sufficient space.
  3. In your web browser, log in to DGLux5.
  4. Select Project > Export/Import > Import Project.
  5. Click Choose File, and select pa2_main_rXXX.zip.
  6. Click OK.